EnviroScape Mural®

Sample Sheets: Order a sheet of
Sample Set: Order a of EnviroScape Mural®


Vertical Tabs

Product Information

Product Information: 

Pre-pasted, PVC-free printable wallcovering material

Part of the environmentally responsible conVerd™ brand for Wide Format Print Media applications

Features & Benefits: 

  • 6 mil / 170 gsm 
  • High performance, dimensionally stable, breathable and environmentally sustainable material
  • Economical alternative to PVC wall covering
  • 10% post-consumer waste (PCW) content
  • Meets California 01350 standards for indoor air quality
  • A prerequisite for LEED credit certification
  • Carries a class "A" fire rating based upon ASTM E-84
  • Water activated adhesive backing system
  • 100% dry strippable (no residue or scraping)
  • Easy to install and remove on walls, windows and other rigid surfaces

Enviroscape Mural® HD

  • 10 mil / 225 gsm 
  • Available in Smooth or Textured - for a unique embossed surface finish
  • HD (Heavy Duty) is an enhanced version designed to provide an easier and more substantial installation
  • The textured product can be applied to unsmooth surfaces but gives the appearance of a smooth surface (unlike vinyl which shows background surfaces)

Product Features: 

  • Print Media
    • Wide Format Media
      • Flexible Media
      • PVC-alternative Wallcoverings

Print Method : 

  • Digital Print
    • Inkjet Print
      • Latex
      • True Solvent
      • UV Curable
  • Offset Print
  • Screen Print

Market and Applications: 

  • Print Graphics Substrates
    • Wide & Grand Format
  • Wide Format Media
    • Indoor POP
    • Printable Wallcovering & Murals
FSC Info:

FSC® C020981 Product Guide



Recycled Content







Production Guidelines
Product Guidelines: 
  • Spray water to the back of the sheet until thoroughly saturated, or place in a dip tray.
  • Gently fold the sheet with adhesive parts facing each other to keep moist and allow adhesive paste to activate.
  • Set aside for 3 minutes.
  • Unfold sheet and place onto a wall from top to bottom. 
  • Carefully smooth out bubbles and creases using a broad smoothing brush, not a squeegee, from the middle of the sheet out.
  • If necessary, re-spray with water around the edges during the entire process. 
  • Allow surface to dry to the touch and wipe off any excess adhesive using a damp cloth or sponge. 
  • Trim the excess waste using a straight knife with a fresh blade tip.
  • Spray the surface of the mural with water, allowing the water-based adhesive to relax for easier removal. 
  • Start at the top of the image and remove a 6-8" section of the panel completely, and then continue to draw the product back on itself at a 180° degree angle until the image is completely removed. 
  • In instances where the substrate appears to be very tightly bonded to the surface, spray more water. 
  • After moistening the surface, allow the mural to stand for 60-90 seconds and then return to peeling the mural back upon itself.
  • Use a wet cloth to remove any remaining adhesive from surface.
Specification & Data Sheets